Item number: 60000814

Disco "Warm Up Party" PA Set 600W DJ Amplifier 10" Speaker Pair

With the PA set " Warm Up Party" from the Sapphire Series starts the party and willnot end before dawn. Consisting of two Skytec TX10 10" PA speakers with rock-solid construction and widespread use of options and the Skytec SPL600 PA Amplifier is perfect for a party room and smaller event venues to dance with massive bass sounds, powerful highs and balanced mids. Input options via the 6.3 mm jack to connect the TX10 Skytec speakers with audio setups of any kind.

The Skytec SPL600 is an amateur friendly DJ and PA amplifier . But the device combines the power of a power amplifier PA connection with the spectrum of a home amplifier. The stable , durable design guarantees that the unit can be transported without problems. In addition, the Skytec SPL600 amplifier can be tucked into a 48cm rack. The stereo RCA input , the signal of motivated playback devices - from mixers - CD, DVD , etc.. Also a 10 meters speaker cable is included in the " Warm Up Party " PA system.


Recommended use:

  • House Parties
  • Ideal for small restaurant & bar function rooms

Set Includes:

  • 1 x Skytec PA-600 Watt DJ PA Amplifier 19" Rack Mountable - Black
  • 2 x Skytec TX10 25cm (10") Passive PA Speaker 150W RMS
  • 1 x Speaker Cable 2 x 1.5mm² 10m Transparent / + Kz

Item Specifications:

Skytec PA-600 Watt DJ PA Amplifier 19" Rack Mountable - Black

  • 2 x 300 W RMS at 4 Ohm (equivalent 2 x 600 W Max at 4 Ohms or 2 x 300 W Max at 8 Ohms)
  • Stable, transport friendly steel housing
  • Suitable for rack installation
  • Inputs: 6.3 mm Jack and RCA
  • Outputs: SpeakOn PA adaptor cable or normal speaker cables (screw terminals)
  • Separate volume controls for left and right channels
  • Rear located high performance fan
  • Front controls
  • Frequency response: 20 Hz to 20 kHz
  • Input impedance: >10 kOhm
  • Input level: >0 dB
  • Distortion factor: <0.1%
  • Noise: >98 dB
  • Channel isolation: >82 dB
  • Power level LED display
  • 19 inch (48 cm) 2 Units High
  • Weight: 10kg
  • 482 x 270 x 132mm
  • Note: The power specifications for this amplifier have been taken directly from the instruction manual which have been provided directly from our manufacturers. If you find a contradicting specification printed on the box, please know that this is not correct. We have confirmed this with our manufacturers.
Skytec PA-600 Watt DJ PA Amplifier 19

Skytec TX10 25cm (10") Passive PA Speaker 150W RMS

  • Passive 25cm (10") PA speaker with piezo tweeter and 150 watts RMS power
  • Robust bass reflex cabinet with felt cover, impact edges and metal speaker grille
  • Side handles, rubber feet and stand mount for quick-stand mounting
  • Connections: 1 x 6.3mm jack input, 1 x set of speaker terminals
  • Peak power: 600W
  • Power: 300W
  • Impedance: 8 ohms
  • Frequency response: 40Hz - 20kHz
  • SPL: max. 121dB
  • 54 x 32 x 30cm (WxHxD)
  • Weight: about 9kg
Skytec TX10 25cm (10

Speaker Cable 2 x 1.5mm² 10m Transparent / + Kz

  • Highly flexible cable in required length. Fine assembly with 2 wire cable, one wire coloured.
  • 1.5mm² core
Speaker Cable 2 x 1.5mm² 10m Transparent / + Kz

Product details

Recommended use:
  • House Parties
  • Ideal for small restaurant & bar function rooms

Set Includes:
  • 1 x Skytec PA-600 Watt DJ PA Amplifier 19" Rack Mountable - Black
  • 2 x Skytec TX10 25cm (10") Passive PA Speaker 150W RMS
  • 1 x Speaker Cable 2 x 1.5mm² 10m Transparent / + Kz
Item Specifications:

Skytec PA-600 Watt DJ PA Amplifier 19" Rack Mountable - Black

  • 2 x 300 W RMS at 4 Ohm (equivalent 2 x 600 W Max at 4 Ohms or 2 x 300 W Max at 8 Ohms)
  • Stable, transport friendly steel housing
  • Suitable for rack installation
  • Inputs: 6.3 mm Jack and RCA
  • Outputs: SpeakOn PA adaptor cable or normal speaker cables (screw terminals)
  • Separate volume controls for left and right channels
  • Rear located high performance fan
  • Front controls
  • Frequency response: 20 Hz to 20 kHz
  • Input impedance: >10 kOhm
  • Input level: >0 dB
  • Distortion factor: <0.1%
  • Noise: >98 dB
  • Channel isolation: >82 dB
  • Power level LED display
  • 19 inch (48 cm) 2 Units High
  • Weight: 10kg
  • 482 x 270 x 132mm
  • Note: The power specifications for this amplifier have been taken directly from the instruction manual which have been provided directly from our manufacturers. If you find a contradicting specification printed on the box, please know that this is not correct. We have confirmed this with our manufacturers.
Skytec PA-600 Watt DJ PA Amplifier 19

Skytec TX10 25cm (10") Passive PA Speaker 150W RMS

  • Passive 25cm (10") PA speaker with piezo tweeter and 150 watts RMS power
  • Robust bass reflex cabinet with felt cover, impact edges and metal speaker grille
  • Side handles, rubber feet and stand mount for quick-stand mounting
  • Connections: 1 x 6.3mm jack input, 1 x set of speaker terminals
  • Peak power: 600W
  • Power: 300W
  • Impedance: 8 ohms
  • Frequency response: 40Hz - 20kHz
  • SPL: max. 121dB
  • 54 x 32 x 30cm (WxHxD)
  • Weight: about 9kg
Skytec TX10 25cm (10

Speaker Cable 2 x 1.5mm² 10m Transparent / + Kz

  • Highly flexible cable in required length. Fine assembly with 2 wire cable, one wire coloured.
  • 1.5mm² core
Speaker Cable 2 x 1.5mm² 10m Transparent / + Kz

What our customers think

Leave the 1st product review!

Small Image

Disco "Warm Up Party" PA Set 600W DJ Amplifier 10" Speaker Pair

Highlights
£189.90 Incl. VAT
You can change your order at any time

Customers who bought this product bought also the following: