DX2000 PA Amplifier
- PA amplifier with 2000 watts maximum power (2 x 1000W at 4Ohms, 2 x 600W at 8 ohms, 2000W Bridge-power at 8 ohms)
- Suitable on 48cm (19") rack installation - 2 rack units
- Bridgeable - 2/1- channel operation
Please select a variant:
You may change your order at any time.
The Malone DX2000is a powerful PA amplifier that gives your audio signal the power required whenworking with a large audience. The amp is fed with sound through two RCA inputjacks and two 6.3 mm audio inputs. The connection to the speakers is made byfeeding the audio signal either through the two NL4 outputs, the two 6.3 mmjacks or the screw terminals, making the DX2000 a versatile amp for a varietyof locations and connection situations.
Every audio channel is equipped with the ordinary 1000watts. The output power of each channel can be easily configured using the twohandy front panel knobs. The amplifier can be operated in so-called bridge modewith only one channel as an alternative to the two-channel stereo mode. Changingbetween the two variants is easily done with a switch back and forth. Theperformance of this one channel is doubled accordingly and pushes the audiosignal to the speakers with a powerful 2000 watts. Sonically, we should not beafraid to push the performance of the amplifier because even at the highestlevels, the DX2000 produces a very clean sound.
For the case of internal ground loops and hum the circuit ofthe device can be very easily separated from the crowd with the Ground LiftSwitch. The casing of the DX2000 offers a clean design that accuratelyrepresents the force of the booster. It is made entirely of metal and is easilyloadable on a 48cm (19") rack installation.
User manual PDFTop features:
-
PA amplifier with 2000 watts maximum power (2 x 1000W at 4Ohms, 2 x 600W at 8 ohms, 2000W Bridge-power at 8 ohms)
-
Suitable on 48cm (19") rack installation - 2 rack units
-
Bridgeable - 2/1- channel operation
- Inputs: 2 x 6.3mm jack, 2 x RCA
- Outputs: 2 x NL4, 2 x 6.3mm jack, 2 x screw terminal
- Two large, ergonomic knobs for easy adjustment to thedesired level
- Ground/lift switch
- Resilient metal housing
- Channel by channel adjustable volume
- LED indication for clipping and backup
- Frequency range: 10Hz to 20kHz
- Damping factor:> 250
- S/N Ratio:> 90dB
- Slew Rate: 30V/uSec
- Input sensitivity: 0.77 V
- Input impedance: 20k ohms
- Total harmonic distortion: <0.1%
- Supply voltage:
- Power button
- Power supply: 220V/50Hz
- 1 x device
- English manual (other languages: German)
- 48.2 x 8.8 x 31.4 cm (WxHxD)
- Weight: about 9 kg
- PA amplifier with 2000 watts maximum power (2 x 1000W at 4Ohms, 2 x 600W at 8 ohms, 2000W Bridge-power at 8 ohms)
- Suitable on 48cm (19") rack installation - 2 rack units
- Bridgeable - 2/1- channel operation
Save with our sets:
You may change your order at any time.
You may change your order at any time.
You may change your order at any time.