Item number: 10028103

Marmitek Invisible Control 2 IR Remote Control Extension

Transmits infrared signals through closed cabinets or walls

Operates with all A/V equipment such as stereos, receivers or DVD players

Controls up to two devices, upgradeable to four devices

Did you ever notice that: In the living room cabinet, your electrical equipment stays out collecting dust, while behind the cabinet doors there is all that space not being used? The reason is usually that the remote control won't transmit its signal through the cabinet doors. Well now the "Invisible Control 2" Infrared extension circuit from Marmitek is making this problem a thing of the past. The small IR receiver of the Visible Control 2 can be placed on your wall, while all the other A/V devices can hide.

To transmit the infrared signal, the small infrared LEDs are simply attached to the receiver of the controlled A/V devices. Thanks to the long transmission cable they can be located up to 3m away from the Invisible Control 2. Instead of at the stereo system, you now aim the remote at the receiver unit and the the unit will forward all your commands along the cable - through cabinet doors or around walls. Thus, it is also possible to control the stereo in the living room from the kitchen. This is especially handy when you want to use just one system for the whole apartment.

The Marmitek Invisible Control 2 allows you to control two devices and can be extended- with an additional infrared LED cable- to up to four devices.

Available colors: silver

Product details

Highlights

  • Infrared signal that goes through cabinets or around walls
  • Controls up to two devices
  • transmits the remote control signals of all the A/V devices

Included

  • 1 x Receiver unit
  • 1 x Infrared extension cable with 2 LEDs
  • 1 x Power adapter
  • English manual (other languages: German, French, Spanish, Italian, Dutch)

Dimensions

  • 9 x 3 x 7.5 inches (WxHxD receiving unit)
  • Weight: 50 g

Features

  • Infrared Reception unit: 8m
  • Frequency Response: 30-60kHz
  • Infrared receiving angle: 60° (+/-30° from center)
  • 3m cable length (2m receiving part, 1m of division to LED)
  • works only with infrared signals, not with high-frequency signals
  • Power Supply: DC 12V 500mA power adapter

Operating instructions

What our customers think

Leave the 1st product review!

Small Image

Marmitek Invisible Control 2 IR Remote Control Extension

Highlights
  • Infrared signal that goes through cabinets or around walls
  • Controls up to two devices
  • transmits the remote control signals of all the A/V devices
£48.99 Incl. VAT
You can change your order at any time

Top Sellers