Powerful PA amplifier with 2 separately controllable
channels and 800W peak power.
Bridgeable - possibility of 2- and 1-channel operation.
The device is suitable for 48cm rack mounting.
The Malone DX800
is a powerful PA amplifier that gives your audio signal the power required when
working with a large audience. The amp is fed with sound through two RCA input
jacks and two 6.3 mm audio inputs. The connection to the speakers is made by
feeding the audio signal either through the two NL4 outputs, the two 6.3 mm
jacks or the screw terminals, making the DX800 a versatile amp for a variety of
locations and connection situations.
Every audio channel is equipped with the ordinary 400 watts.
The output power of each channel can be easily configured using the two handy
front panel knobs. The amplifier can be operated in so-called bridge mode with
only one channel as an alternative to the two-channel stereo mode. Changing between
the two variants is easily done with a switch back and forth. The performance
of this one channel is doubled accordingly and pushes the audio signal to the
speakers with a powerful 800 watts. Sonically, we should not be afraid to push
the performance of the amplifier because even at the highest levels, the DX800 produces
a very clean sound.
For the case of internal ground loops and hum the circuit of
the device can be very easily separated from the crowd with the Ground Lift
Switch. The casing of the DX800 offers a clean design that accurately
represents the force of the booster. It is made entirely of metal and is easily
loadable on a 48cm (19") rack installation.