Powerful PA amplifier
with 2 separately controllable channels and 2000W peak power.
possibility of 2- and 1-channel operation.
The device is
suitable for 48cm rack mounting.
The Malone DX2000
is a powerful PA amplifier that gives your audio signal the power required when
working with a large audience. The amp is fed with sound through two RCA input
jacks and two 6.3 mm audio inputs. The connection to the speakers is made by
feeding the audio signal either through the two NL4 outputs, the two 6.3 mm
jacks or the screw terminals, making the DX2000 a versatile amp for a variety
of locations and connection situations.
Every audio channel is equipped with the ordinary 1000
watts. The output power of each channel can be easily configured using the two
handy front panel knobs. The amplifier can be operated in so-called bridge mode
with only one channel as an alternative to the two-channel stereo mode. Changing
between the two variants is easily done with a switch back and forth. The
performance of this one channel is doubled accordingly and pushes the audio
signal to the speakers with a powerful 2000 watts. Sonically, we should not be
afraid to push the performance of the amplifier because even at the highest
levels, the DX2000 produces a very clean sound.
For the case of internal ground loops and hum the circuit of
the device can be very easily separated from the crowd with the Ground Lift
Switch. The casing of the DX2000 offers a clean design that accurately
represents the force of the booster. It is made entirely of metal and is easily
loadable on a 48cm (19") rack installation.