Item number: 10004851

Klarstein 90TS1 Stainless Steel Cooker Hood Extractor Fan

Kitchen ventilator/hood with three levels and 500 m³/h air extraction rate.

90 centimeters in width. Extraction mode. Possibility of using recirculating air.

Touchpad fitted into black safety glass - bottom tray and brushed stainless steel.

Energy efficiency class C

The Klarstein 90TS1 is an elegantly designed ventilator that will quietly purify the air in your American style kitchen!

The island style ventilator makes use of advanced exhaust fan technology and has three settings, the highest of which can circulate 500m³ of air per hour to easily cope with any kitchen condition.

Even when used on the highest setting, the noise level will never exceed 68dB, meaning it won't affect communication in the kitchen, nor will it be overheard by guests.

It also uses three separately replaceable grease filters to effectively control the quality of the air.

The architectural approach to the ventilator's design makes it the perfect choice for contemporary living spaces.

The border is made of black glass, in which an illuminated touchpad and display are integrated. The base and vent are made from elegant brushed stainless steel.

The hood also boasts four bright halogen lamps each, giving you a perfect view of whatever you are cooking!

It can even be converted into recirculation mode by using the included activated carbon filters. Additional active carbon filters can be found on our website under item number 10004859.

Product details


  • Ventilator/ hood / bonnet island with operating front of black 8mm safety glass - bottom tray and brushed stainless steel
  • 3 power levels - Vented operation - Ability to convert to recirculation mode
  • Extraction rate at the highest power level 500m³/h
  • Illuminated touchpad with display fittings
  • Optional switchable illumination with four halogen lamps
  • Low operating noise - less than 68 dB at the highest power level
  • Energy efficiency class C


  • 1 x Device
  • 1 x Wall bracket
  • 2 x Stainless steel covers for covering the wall bracket
  • 1 x Exhaust hose
  • Mounting hardware
  • English user manual (other languages including: German)


  • Depth: 53.5cm
  • Width: 90cm
  • Suction surface: 71 x 35.5cm
  • Cover ratio: 75 to 105cm
  • Visible slot width: 30.5cm
  • Visible pit depth: 27cm
  • Diameter exhaust hose: 15m
  • Flexible hose connection 55-170cm
  • Power cable length: 1.5 meters
  • Weight: about 28kg

Important Delivery Information!
Due to the large size of this item we send it with our specialist courier spedition. As spedition deal with large shipments only they take slightly longer to reach you, usually between 7 and 10 working days from dispatch.


  • 3 interchangeable aluminum grease filter
  • 2-piece telescopic shaft cover made of stainless steel
  • Extraction: 1 engine, 2 compartments units - partially Teflon-coated
  • 250W power
  • Power supply: 230V, 50Hz

Operating instructions

What our customers think

of 1 Product Rating

of Peter Benn reviewed on 03/12/2012

The hood comes with minimal instructions. It does however talk of the need to keep the hood at least 750mm from the hob. Our room is a standard 2.4M high, the worktop is 93 from the floor and if you fit the hood to the ceiling as it should be, it is too long to allow for the 750mm clearance required. Our solution was to reconfigure the joists in the ceiling and take the entire unit through the ceiling and fix it to a frame we made up. This gave us an additional 100mm which is enough to give us the required clearance. It was a pain to say the least, cost me a fair bit extra in time and materials and has left some remedial work where the unit was originally fitted before we discovered its too long. Probably suited to rooms with a higher than ;standard' ceiling, but if you live in a normal house, this probably isnt for you..

[...] Read Review

11 of 11 People found this review helpful


Small Image

Klarstein 90TS1 Stainless Steel Cooker Hood Extractor Fan

  • Cooker hood extractor with 3 power levels
  • Stainless steel and black glass finish
  • Extracts at 500m³/h
£339.99 Incl. VAT
You can change your order at any time

Top Sellers