The 'Bassini' DJ PA system has a massive 1800W of pure audio power. Equipped with all of the essential components you need, the set allows you to present professional events at small or medium-sized venues. The amplifier and speakers are easy to set-up and install.
1800W PA system for providing professional sound at events with up to 300 people.
The 'Bassini' DJ PA system combines a powerful Skytec amplifier with two bass-loving Skytec speakers.
With its natural and well-balanced sound, the amplifier and speakers would be perfect for all kinds of small and medium-sized events. Thanks to its sturdy design, the equipment can also be easily and safely transported.
The system is supplied with a full cable set, allowing you to connect and use the equiment immediately.
Matching components, such as mixers, microphones and stands, can be found in our shop.
- Ideal for events with up to 300 people
- Perfect for private or professional parties
- Stylish design for lounges, bars and clubs
- 2 x Skytec 900W DJ PA Blue LED Dual 12" Passive Speaker
- 1 x Skytec PA-600 Watt DJ PA Amplifier 19" Rack Mountable - Black
- 1 x Speaker Cable 2 x 1.5mm² 10m Transparent / + Kz
Skytec 900W DJ PA Blue LED Dual 12" Passive Speaker
- 2 x 12" (30cm) bass drivers
- 3-way bass reflex system, 5 speakers
- 900W max. Performance
- Music-sensitive blue LED light effect
- Recessed Side Handles
- Connections: 1 x set of stereo screw terminals (gold plated)
- 30cm mid-low woofer
- 27cm Mid-Horn
- Piezo Tweeter
- Felt covering and protective corners
- Impedance: 8 ohms
- Frequency response: 35 Hz to 20 kHz
- SPL Max: 95dB plus or minus 3 dB
- 40 x 102 x 28cm
- Weight: 18kg
Skytec PA-600 Watt DJ PA Amplifier 19" Rack Mountable - Black
- 2 x 300 W RMS at 4 Ohm (equivalent 2 x 600 W Max at 4 Ohms or 2 x 300 W Max at 8 Ohms)
- Stable, transport friendly steel housing
- Suitable for rack installation
- Inputs: 6.3 mm Jack and RCA
- Outputs: SpeakOn PA adaptor cable or normal speaker cables (screw terminals)
- Separate volume controls for left and right channels
- Rear located high performance fan
- Front controls
- Frequency response: 20 Hz to 20 kHz
- Input impedance: >10 kOhm
- Input level: >0 dB
- Distortion factor: <0.1%
- Noise: >98 dB
- Channel isolation: >82 dB
- Power level LED display
- 19 inch (48 cm) 2 Units High
- Weight: 10kg
- 482 x 270 x 132mm
- Note: The power specifications for this amplifier have been taken directly from the instruction manual which have been provided directly from our manufacturers. If you find a contradicting specification printed on the box, please know that this is not correct. We have confirmed this with our manufacturers.
Speaker Cable 2 x 1.5mm² 10m Transparent / + Kz
- Highly flexible cable in required length. Fine assembly pices with 2 wire cable, one wire coloured.
- 1.5mm² core