This DJ PA set features a powerful 1600W
for creating that perfect party set up. With the four 10" (25cm) 3-way
speakers, amplifier and mixer you’ve got everything you need for medium to large-sized
events.
The two Omnitronic speakers deliver a
powerful, bassy sound that is ideal for Rock and Pop events. Together with the
2 x 800W Hollywood amplifier you’ve got a great piece of kit for integrating
all sorts of DJ and PA equipment for your party or events.
The Auna 3/2-channel mixer offers all the
functions needed for a DJ and provides even more connection options for your
set-up.
The powerful amplifier and PA speakers work
perfectly to give to give your event the great sound it deserves.
The set comes complete with microphone and
cable set so that you can get going straight away.
We are also happy to put together a DJ PA
set tailored to your own specific requirements.
Recommended use:
- Perfect for medium to large-sized events
- Ideal solution for your Rock or Pop party
- Plug-in and go with everything you need
included
Set Includes:
- 1 x "IMPACT-1000" 1600 Watt DJ/PA STEREO 19" AMPLIFIER AMP
- 4 x Omnitronic DX1022 10" Passive DJ PA Speaker- 400 Watts
- 1 x Auna TMX-2211 3/2 Channel DJ Mixer with Talkover
- 1 x Microphone for Professionals use with case
- 1 x Speaker Cable 2 x 1.5mm² 10m Transparent / + Kz
- 1 x 4 Piece Set 2 Meter RCA/Phono Cables - 4 Prong
Item Specifications:
"IMPACT-1000" 1600 Watt DJ/PA STEREO 19" AMPLIFIER AMP
- Power 2x 800 watts MAX at 4 Ohm
- Power 2x 356 watts RMS at 4 Ohm
- Split controller for volume left/right
- Two level meter for the left and right canal with 8 blue and super-bright LEDs
- Front-sided on/off-button + power-LED
- Input over cinch/RCA or 6,3mm jack
- Speaker- connection optionally through XLR, screw-terminal or Speakon/PA-plug
- Frequency range 20Hz-25kHz
- Signal-to-noise ratio 80dB(decibel)
- Distortion factor <0.3%
- Safety switch (short-circuit-resistant)
- Control elements (see diagram):
- 1. on/off switch
- 2. volume control channel 1
- 3. volume control channel 2
- 4. line connector
- 5 safety switch
- 6 ventilator
- 7. audio-output cinch/RCA R/L
- 8. audio-output jack R/L
- 9. speaker-output (R) XLR
- 10. speaker-output (R) PA
- 11. speaker-output (L) XLR
- 12. speaker-output (L) PA
- 13. speaker- screw-terminal (R-)
- 14. speaker- screw-terminal (R+)
- 15. speaker- screw-terminal (L-)
- 16. speaker- screw-terminal (L+)
- Suitable for 19" (48cm) Rack - 3U
Omnitronic DX1022 10" Passive DJ PA Speaker- 400 Watts
- 25cm (10") speaker with 200W RMS or 400W MAX power output
- 3-way speaker especially suitable for dance music
- Piezo tweeters for powerful treble
- Midrange horn
- Built in top hat mounts
- Impedance: 8 ohms
- 10” bass driver
- 1 Piezo tweeter, 1 mid horn
- Connections: 2 Speakon sockets
- Max. Sound pressure: 95 dB (1m)
- Frequency range: 50 - 18,000hz
- 46,5 x 36 x 31 cm
- Weight: 12 kg
Auna TMX-2211 3/2 Channel DJ Mixer with Talkover
- Simple controls with smooth, wear resistant faders
- Compact and easy to transport
- Talkover function (-12 drop)
- Solid, sturdy construction
- Connections: 6.3mm jack to headphone output, 2 x 6.3mm jack microphone inputs, 2 x Phono to line RCA input, 1 x RCA line input, 1 x RCA line out output
- Microphone volume dial-adjustable
- Level-meter
- Stereo/Mono mode
- Mic in/out: 15mV (10 kOhm)
- Phono Input: 3mV (47 kOhm)
- Line Input: 150mV (22 kOhm)
- Headphone output: 300mV (8 to 16 Ohm)
- Frequency response: 20 Hz to 20 kHz
- 23 x 6 x 13 cm
- Weight: approx. 1 kg
Microphone for Professionals use with case
- Filtered sound – little to no feedback
- XLR plug with 5m cable
- Filtered sound – little to no feedback
- XLR plug with 5m cable
- Cardioid Microphone
- Frequency range 50-18,000 Hz
- 600 Ohm
- On/Off switch
- XLR plug with 5m cable
- 6.5mm jack
- Weight: approx 190g
- Cable length: 5 m
Speaker Cable 2 x 1.5mm² 10m Transparent / + Kz
- Highly flexible cable in required length. Fine assembly pices with 2 wire cable, one wire coloured.
- 1.5mm² core
- Please be aware that the product can be different from that photographed here. The cable is not necessarily supplied on a spool as pictured here. Apart from arriving with or without a spool, all details described above are correct./LI>