Item number: 10011095

Auna HI 600 PA Amplifier 600W 2U

Powerful PA amplifier with XLR, jack, and RCA, PA outputs and speaker terminals.

600 watts max. power at 8 ohms, 350W at 4 ohms and 900W power at 2 ohms.

Bridgeable 2- and 1-channel operation, suitable for 48cm (19 ") 2U rack mounting.

The Auna HI 600 PA Amplifier combines uncompromising performance with extensive connectivity options and a harmonious design concept.

In terms of technical performance, the amplifier is equipped with 600 watts of power (4 ohm). In addition to the regular operation, the amplifier may also be bridged in 1- and 2-channel operation to take advantage of all power reserves. The Auna HI 600 can then achieve an amazing 900 watts of power (at 2 ohms). The built-in fan cools the device, with vents that counteract excessive heat generation.

Incoming audio signals may be connected to the PA via XLR, jack, and RCA inputs. PA speaker jacks and screw terminals further strengthen connections to different boxes. The LEDs on the front panel provide information on existing signals and show an alert in the case of clipping.

The housing of the Auna HI 600 PA amplifier impresses with its clean lines, silver front bezel, and black chassis. 48cm (19 ") rack installation with 2 units is also possible.

Product details

Highlights

  • PA amplifier with 600 watts max. power at 4 ohms at (350W into 8 ohms and 900W power at 2 ohms)
  • XLR, jack and RCA inputs, PA outputs and speaker terminals
  • Bridgeable with possibility of 2- and 1-channel operation
  • Black metal case with silver bezel, suitable for 48cm (19 ") rack-mounting

Included

  • 1 x device
  • 1 x power adapter
  • 1 x English user manual (other languages: German)

Dimensions

  • 48 x 9 x 48cm (WxHxD)
  • 2U
  • Weight: about 16.5kg

Features

  • Connections: 2 x XLR line input (balanced), 1 x 6.3mm jack line input (balanced), 1 x 6.3mm jack line input (unbalanced), 1 x stereo RCA line input (balanced), 2 x PA speaker output, 2 x set of speaker terminals
  • Frequency response: 20Hz - 20kHz (+/- 0.3dB)
  • S / N Ratio: 100dB
  • Input sensitivity: 1.2 Vrms
  • Total harmonic distortion: <0.1% (4 ohms), <0.05% (8 Ohm)
  • Input impedance:> 20 kOhm
  • Volume control
  • Stereo / mono switch
  • Power LED
  • Signal LED
  • Clip LED
  • Cooling: fan
  • Backup 
  • Stand feet
  • On / off switch on the front panel
  • Power supply: AC 220V, 50Hz

Operating instructions

What our customers think

Leave the 1st product review!

Small Image

Auna HI 600 PA Amplifier 600W 2U

Highlights
  • PA amplifier with 600 watts max. power at 4 ohms 
  • XLR, jack and RCA inputs, PA outputs and speaker terminals
  • Bridgeable with possibility of 2- and 1-channel operation
£216.99 Incl. VAT
You can change your order at any time